Godox MS300 This is a studio flash with a recycling time of 0.1s to 1.8s and a flash duration of 1/2000 of a second. Its power is adjustable in 50 steps, from 1/32 to full power. The 150W modeling lamp is also adjustable, from 5% to 100%, for better pre-visualization of lighting effects. Easy to use Flash settings are easily accessible via buttons on the rear panel and displayed on the easy-to-read LCD screen. The flash can be triggered via the sync cable, the test button, or remotely in slave mode. Pre-flash detection The flash head has also been equipped with an anti-pre-flash function, which greatly simplifies working with point-and-shoot cameras and other cameras that use pre-flash. Versatility The MS300 weighs approximately 3 kg, allowing two or more heads to be assembled without creating excessive loads. In addition, this flash has been equipped with a Bowens mount to allow the use of Godox modifiers, as well as accessories from many other manufacturers that use the same mount. Godox X System This flash can be managed by X System transmitters to remotely control, for example, power, the modeling lamp, or to trigger it, etc. The system is divided into 16 groups and 32 channels. Flash duration and recycling time The MS200's flash duration ranges from 1/2000 to 1/800 of a second, while the recycling time varies from 0.1 to 1.8 seconds. Precise adjustment The power of this flash can be adjusted in 50 steps from 1/1 to 1/32, while the brightness of the 150W modeling lamp can be adjusted from 5% to 100%. Interface All functions and settings are displayed on the LCD screen. Package contents: MS300 flash power cable modeling lamp bulb protection Seller's warranty: 2 years